Erichsen is offered by ИМПЕКСРОН ООД - IMPEXRON Ltd. for years at reasonable prices and delivery time to Bulgaria . Check our web page for products from the brand Erichsen regardless if they are not stated on our website, do not hesitate to contact us for all future product enquiries. Our products are delivered to your door with our wide distribution network throughout Bulgaria .
Our company is not an authorized distributor. All rights are reserved by the manufacturers and their official partners.
конична DORNBIEGEPRUFER
Conical Mandrel Bending Tester, EN, EN ISO, ASTM
Sheet Metal Testing Machine, Model 100 with manual operation, maximum drawing force 30 kN and compliance with the standard adjustable constant blank holding pressure max. 10 kN, with Tiefungsanzeige by counting with 0.1 mm Reading accuracy as well as a Test Tool No. 27 after EN ISO 20482, for testing the deep drawability of sheet metal and bands from 0.1 to 1.5 mm thick (² at approximately 400 N / mm strength) in widths of 13-90 mm, by means of the Erichsen cupping test according to EN ISO, EURO NORM, BS, NF, GOST, UNI, UNE. Weight: approximately 36 kg net Dimensions: approx 340 x 350 x 450 mm (L x W x H)
машина за изпитване на ламарина
Dry Film Thickness Gauge acc. to Rossmann,(REFERENCE CLASS)measuring range: 0 - 1000 μm
[multi cutting device 295 / I with 6 blades and cutting distance 1 mm for cross-cut tests in accordance with EN ISO, ISO, VDA and EN, incl Motion, Polyamide bristle brush and plastic case]
MULTI-CROSS CUTTER
Мехршнайденгерат
Режещо устройство 295 / XIV, твърд покритие сонда, монтирана в адаптер блок с държач за съкращаване на извитата Повърхностите, вкл. Гъвкава владетел и Пластмасови случай, без тип М
(С 6 лопатки, рязане на разстояние 2 mm напречно люк тестове в съответствие с EN ISO, ISO, ASTM, JIS и VDA, вкл. лупа, полиамид четка и пластмасова кутия)
(mit 6 Schneiden und Schnittabstand 2 mm für Gitterschnitt- prüfungen nach EN ISO, ISO, ASTM, JIS und VDA, inkl. Lupe, Polyamidborsten-Bürste und Kunststoffkoffer)
(with 6 blades, cutting distance 2 mm for cross-cut tests according to EN ISO, ISO, ASTM, JIS and VDA, incl. magnifying glass Nylon bristle brush and plastic case)
Тример с много ръбове
Тест на твърдостта Модел 318 вкл. Probe # 1. (след Bosch, 0.75 мм о) и 3 пружини
Probe cards PK used to determine the opacity of pigmented Paints of all kinds: Type 22/4 - Spread size: 500 cm ²
Вдлъбнатина твърдост тестер според Buchholz ОТ 53153 „РЕФЕРЕНТЕН КЛАС“ вкл. специален измервателен микроскоп с осветление
Чаша на потока
Dip Flow Cup (Orifice dia. 8 mm), Model 321
applicator
Ръчен габарит дебелина на покритието
DIN, ISO, ASTM, BS, NF "REFERENCE CLASS" Measuring range: Scale division: 0-125 µm; 5 µm
Ritzstift nach van Laar 426
Portable coating thickness gauge
Sikkens scratching tool 463
Tauch-Auslaufbecher in Anlehnung mit Düsen-Ø 6 mm